RGB remote controls
Wall dimmers
DMX masters, decoders & amplifiers
RGB controllers

We offer an ever-expanding range of top quality controllers from the leading manufacturers:

  • DMX masters, decoders, amplifiers and wall-mounted controllers
  • 0-10V wall-mounted dimmers
  • RGBW remote controls
  • Analogue RGBW controllers : RF and DMX controlled
  • Digital RGBW controllers : DMX, RF and offline controlled
  • Mini analogue RGB controllers
  • Mini digital RGB controllers
  • Dimming controllers

Our controllers are offered with a LUMUL 2 year warranty, but for added peace of mind, we offer an optional 5 year warranty at a slightly higher cost.

SR-2102BEA RGBW DMX Decoder

  • RGBW DMX decoder
  • Input voltage: 12-36V
  • Input: DMX
  • Output: 12-36V constant voltage RGBW
  • Output: 4 channels 8A per channel
  • IP20
  • Warranty: Standard 2 years / Optional 5 years

 SR-2102BEA User Manual

A high quality RGBW DMX 512 decoder which can be used to control 5-24V constant voltage RGB, RGBW and single colour flexible strips or Neon Flex. It supports 4 channel of a maximum of 8A per channel. Please note that this is not an RDM DMX decoder.

SR-2100AMP DMX Amplifier

DMX signal amplifier
  • DMX amplifier
  • Input voltage: 12-24V
  • Input: DMX
  • Output: DMX
  • IP20
  • Warranty: Standard 2 years / Optional 5 years

 SR-2100AMP User Manual

A DMX signal amplifier which can be used to amplify a weakened DMX signal so that you can achieve much longer runs of DMX cabling.

SR-2817 RF / WiFi DMX Master

  • DMX master
  • Input voltage: 220V
  • Input: RF
  • Input: WiFi
  • Output: DMX
  • Zones: 8
  • IP20
  • Warranty: Standard 2 years / Optional 5 years

 SR-2817 User Manual

A DMX master which can be controlled by a smartphone / WiFi application or by a remote control. This master is powered directly from 220V AC making installation a little easier.

SR-1009EAWi RF / WiFi RGBW Controller

  • RGBW controller
  • Input voltage: 12-36V
  • Input: WiFi + RF (SR-2819T8 / SR-2819T)
  • Output: 12-36V constant voltage RGBW
  • Output: 4 x 8A
  • IP20
  • Warranty: Standard 2 years / Optional 5 years

 SR-1009EAWI User Manual

A quality controller which can control RGBW, RGB or single colour flexible strips or neon flex. It can be controlled by WiFi (Smartphone application) or by an RF remote control, and multiple of these controllers can be setup in a master-slave configuration so that all controllers remain perfectly in sync at all times.

SR-1009EAWi(WP) RF / WiFi RGBW Controller

  • RGBW controller
  • Input voltage: 12-36V
  • Input: WiFi + RF (SR-2819T8 / SR-2819T)
  • Output: 12-36V constant voltage RGBW
  • Output: 4 x 8A
  • IP67
  • Warranty: Standard 2 years / Optional 5 years

 SR-1009EAWI(WP) User Manual

A quality waterproof controller which can control RGBW, RGB or single colour flexible strips or neon flex. It can be controlled by WiFi (Smartphone application) or by an RF remote control, and multiple of these controllers can be setup in a master-slave configuration so that all controllers remain perfectly in sync at all times.

SR-1009HT RF RGBW Controller + DMX Master

  • RGB controller
  • Input voltage: 220V AC
  • Input: RF (SR-2819T8 / SR-2819T)
  • Output: 220V DC constant voltage RGB
  • Output: DMX
  • Output: 3 x 1.66A
  • IP20
  • Warranty: Standard 2 years / Optional 5 years

 SR-1009HT User Manual

A quality controller which can control 220V RGB or single colour flexible strips or neon flex. The maximum length of lighting which can be controlled depends on the wattage per meter however a good estimate is that 50m of RGB flexible strips can be driven off this controller. It is controlled by an RF remote control. Multiple of these controllers can be controlled by a single remote control.

SR-1009HT(WP) RF RGBW Controller + DMX Master

  • RGB controller
  • Input voltage: 220V AC
  • Input: RF (SR-2819T8 / SR-2819T)
  • Output: 220V DC constant voltage RGB
  • Output: DMX
  • Output: 3 x 1.66A
  • IP67
  • Warranty: Standard 2 years / Optional 5 years

 SR-1009HT(WP) User Manual

A quality waterproof controller which can control 220V RGB or single colour flexible strips or neon flex. The maximum length of lighting which can be controlled depends on the wattage per meter however a good estimate is that 50m of RGB flexible strips can be driven off this controller. It is controlled by an RF remote control. Multiple of these controllers can be controlled by a single remote control.

SR-2816 DMX Master

  • DMX master
  • Input voltage: 12V
  • Input: WiFi / RF (SR-2819T8 / SR-2819T)
  • Output: DMX
  • Output: 3 x 1.66A
  • Zones: 8
  • IP20
  • Warranty: Standard 2 years / Optional 5 years

 SR-2816 User Manual

A wall-mounted RGBW DMX master with colour wheel, supporting 8 zones. This particular unit can be controlled with a smartphone application (WiFi) or a remote control.

SR-2818WIN-D

  • DMX master
  • Input voltage: 12V
  • Input: WiFi
  • Output: DMX
  • Output: RF
  • IP20
  • Warranty: Standard 2 years / Optional 5 years

 SR-2818WIN-D6 User Manual

A WiFi hub / router which will re-broadcast a WiFi signal as an RF signal to our range of SR-1009 controllers, such as SR-1009EAWi or SR-1009HT.

The hub / router has an additional DMX output and can act as a DMX master, converting the input WiFi signal into a DMX output.

The RF signal range of the hub / router far exceeds that of RF remote controls.

SR-SPI-LCD RF / DMX controlled Digital RGB / SPI Controller

  • DMX master
  • Input voltage: 5-24V
  • Input: RF (SR-2819T8 / SR-2819T)
  • Input: DMX
  • Output: DMX
  • Output: SPI
  • Pixels: 1024
  • IP20
  • Warranty: Standard 2 years / Optional 5 years

 SR-SPI-LCD User Manual

A DMX and remote controlled SPI controller supporting a range of WS, TM, UCS, LPD and a few other protocols. The LCD panel makes it easy to program this controller. The digital RGB pixels can be controlled via the remote control (pre-built programs and sequences) or via a DMX master controller.

SR-2819T 2 zone RGBW RF Remote

  • RF remote control
  • Compatible with SR-1009HT, SR-1009EAWI, SR-2816, SR-2108
  • Zones: 2
  • IP20
  • Warranty: Standard 2 years / Optional 5 years

 SR-2819T User Manual

A two zone remote control for controlling a number of controllers.

SR-2819T8 8 zone RGBW RF Remote

  • RF remote control
  • Compatible with SR-1009HT, SR-1009EAWI, SR-2816, SR-2108
  • Zones: 8
  • IP20
  • Warranty: Standard 2 years / Optional 5 years

 SR-2819T8 User Manual

An 8 zone remote control for controlling a number of controllers. Each zone can control numerous controllers.

SR-2812 4 zone RGBW DMX Master

  • Wall-mounted DMX master
  • Input voltage: 12-24V
  • Output: DMX
  • Zones: 4
  • Scenes: 4
  • IP20
  • Warranty: Standard 2 years / Optional 5 years
  • Colours: Black + white

 SR-2812 User Manual

A 4 zone RGBW wall-mounted DMX master. The unit has a glass panel and colour wheel, and offers a range of pre-built colour-changing sequences.

SR-2812B Single zone RGBW DMX Master

  • Wall-mounted DMX master
  • Input voltage: 12-24V
  • Output: DMX
  • Zones: 1
  • Scenes: 4
  • IP20
  • Warranty: Standard 2 years / Optional 5 years
  • Colours: Black + white

 SR-2812B User Manual

A single zone RGBW wall-mounted DMX master. The unit has a glass panel and colour wheel, and offers a range of pre-built colour-changing sequences, plus 4 scenes into which programs / colours can be saved.

SR-2202-0-10V 0-10V rotary dimmer

  • Wall-mounted 0-10V Rotary Dimmer
  • Input voltage: 220V
  • Output: 0-10V
  • Dimming range: 0.1% to 100%
  • IP20
  • Warranty: Standard 2 years / Optional 5 years
  • Colours: White

 SR-2202-0-10V User Manual

A modern up-market rotary wall dimmer, with a glass back plate in either black or white, with a metal dimming knob. Being 0-10V your lights can be dimmed between 0.1% and 100% without any flickering, and a smooth dimming curve. Compatible with Mean Well ELG type B dimming drivers.

SR-2830A-0-10V

  • Wall-mounted 0-10V sensor dimmer
  • Input voltage: 24V
  • Output: 0-10V
  • Dimming range: 0.1% to 100%
  • IP20
  • Warranty: Standard 2 years / Optional 5 years
  • Colours: White

A modern up-market sensor wall dimmer, with a glass back plate in either black or white. Being 0-10V your lights can be dimmed between 0.1% and 100% without any flickering, and a smooth dimming curve. Compatible with Mean Well ELG type B dimming drivers.